Technical articles
This page collects RebeTech technical articles on cable temperature monitoring and meter reading retrofit.
All articles
- Which Certifications Does Your Project Actually Need? — Market access requirements for industrial monitoring equipment: how to work out what your project needs, and how to avoid paying for certifications you do not.
- Why Cable Temperature Monitoring Produces So Many False Alarms — A DTS system that cries wolf gets switched off. Seven common causes of false alarms in cable temperature monitoring, and what a system must do instead.
- What Should a Temperature Monitoring System Do When Data Is Missing? — A system that shows normal after losing its sensor is worse than no system. Why cable temperature monitoring must be able to say cannot determine.
- How to Specify a Cable Temperature Monitoring System — Nine decisions to make before buying DTS cable temperature monitoring: purpose, coverage, asset mapping, alarm policy, data quality, retention and ownership.
- Adding a Better Monitoring Layer to the DTS Hardware You Already Own — If your DTS hardware measures correctly but nobody trusts the alarms, the problem is the layer above it, and that layer can be replaced on its own.
- DTS vs Point Temperature Sensors — How distributed temperature sensing and point temperature sensors differ in coverage, speed, accuracy and cost — and how to pick the right one for a route.